Duracoat Fungicidal Emulsion – Silk	DDE 6
Product Description: this is a high quality silky finish emulsion paint, designed specially for areas that have high algae mould and fungal atmospheres as often found in coastal regions. It gives a good durable and washable silky sheen finish on surfaces, and is suitable for use in kitchens, bathrooms hospitals etc. which have been appropriately prepared and undercoated. This product is basically for internal use. Finish: An even high sheen (silky) finish equal to 50% of good quality gloss enamel paint. Application: By Brush, roller, conventional or airless spray Thinning: Supplied ready for use therefore no thinning is required, if applied by spray, thin with water to sprayable viscosity. Drying Time: Surface Dry: 10-15 minutes Re-coating: 3 hours Cleaning: Clean all equipment with water Colour Range: Available in a wide range if colours from DuraCoat Colour Card and DuraCoat Classic Fan Deck. Spread Rate: 13-15 sq.m/litre when applied on smooth plaster. Spread rate will vary if applied on rough surfaces. Pack sizes: 1 litre, 4 litre, 20 litres Specifications New Unpainted Cement or Plaster: Apply three coats of DuraCoat Fungicidal Emulsion Silk unthinned for better results. If preferred, one coat of DuraCoat Vinyl Matt emulsion can be applied as first coat followed by two coats of DuraCoat Fungicidal Emulsion- Silk. Previously painted surfaces: Clean the surface and remove loose, flaking and powdery materials. Apply one coat of DuraCoat Penetrating Primer followed by two coats of DuraCoat Fungicidal Emulsion Silk Emulsion Previously painted gloss surfaces: Ensure that the gloss paint is completely rubbed down to provide a key. Apply one coat of DuraCoat Universal Undercoat of the desired shade followed by two coats of DuraCoat Fungicidal Emulsion Silk. Please note: When over coating a dark shade with a light shade apply one cat of DuraCoat Vinyl Matt Emulsion followed by two coats of DuraCoat Fungicidal Emulsion Silk.