Duracoat Ex-Tex Two Textured Finish	DDE 7
Product Description: DuraCoat Ex Tex Two Textured Finish is designed to give long protection to walls in one coat application. It is formulated to last long in tropical or coastal conditions. DuraCoat Ex Tex Two Textured Finish contains mould resistance fungicides and can be applied on new plaster, timber blocks and stone surfaces. Finish: Matt finely textured. It gives a finer less coarse finish than Duracoat Tartaruga due to its base of finer rock aggregates Application: First apply with a large paint brush, an area of about 1sq metre. Then lay the surface off with light horizontal brush strokes before texturing with special texture rollers. Using different techniques, a variety of effects can be achieved. Thinning: Supplied ready for use. No thinnig at all recommended Drying Time: Surface dry 2 – 4 hours.                     Hard dry after 24hours Cleaning: Clean all equipment with water immediately. Colour range: Available in White, and very limited medium shades from Duracoat Colour Card and Duracoat Classic Fan Deck Spread Rate: 1kg covers 1.5 sq. mts. depending on surface porosity. Pack Sizes: 5kg, 25kg Specification New Surfaces: Must be scrapped with sand paper and brushed off to remove any deposits and loose particles. For application on wooden surfaces apply one coat of DuraCoat Universal Undercoat first. Previously Painted Surfaces: All loose, flaking and unsound paint should be removed by sanding with the aid of wire brush. If surfaces are mould infected then sterilize with Duracoat Fungicidal Wash. Allow 24 hours drying time before applying DuraCoat Ex Tex Two Textured Finish.